At PCIM 2018 (booth 6-239) in Nuremberg from June 5 to 7, 2018, Rohde & Schwarz will be exhibiting its power-of-ten oscilloscope families R&S RTB2000, R&S RTM3000 and R&S RTA4000 with 10-bit A/D converters, 10 times as much memory as comparable instruments, and large 10.1″ touchscreen displays. The R&S RTB2000 oscilloscope is ideal for education, R&D and production, with a starting price of EUR 1,250. It is the first in its class to offer 10-bit vertical resolution and an acquisition memory of 10 Msample per channel. The R&S RTB2000 also features an impressive 10.1″ capacitive touchscreen. Oscilloscopes in the R&S RTB2000 family are available with two or four channels and with bandwidths of 70 MHz, 100 MHz, 200 MHz or 300 MHz.
Probes for measurements on power electronics
In addition to its oscilloscopes, Rohde & Schwarz will be presenting new probes to meet current challenges of measuring power electronics components. The R&S RT-ZHD high-voltage differential probes enable measurements with excellent signal integrity. Users can make floating voltage measurements up to 6,000 V with a high common mode rejection ratio (CMRR). The probes have a DC measurement accuracy of 0.5 %. With a bandwidth of up to 200 MHz, they can be used to measure fast switching edges. They also feature offset compensation up to 2,000 V. These probes cover a very wide range of measurement applications. They are perfect for measurements with the R&S RTM3000, R&S RTA4000, R&S RTE1000 and R&S RTO2000 oscilloscopes. The new R&S RT-ZPR40 1:1 power rail probe with 4 GHz bandwidth detects even the smallest coupled RF signals and unwanted ripple on power supplies. The R&S RTM3000, R&S RTA4000, R&S RTE1000 and R&S RTO2000 oscilloscope families work very well with this high-sensitivity, extremely low-noise probe.
The R&S Scope Rider with up to 500 MHz bandwidth is ideal for field measurements on power electronics. Thanks to its fully isolated design, this handheld oscilloscope fulfils category CAT IV instrument requirements and can be used for measurements on low-voltage installations up to 600 V. Numerous functions can be added, such as a harmonic analyzer to assess power line quality. A CAN/LIN trigger and decode option is available for users in the automotive industry.
3-in-1 spectrum analyzer
Rohde & Schwarz will also be exhibiting the new R&S FPC1500 spectrum analyzer. This compact instrument provides a spectrum analyzer, a single-port vector network analyzer, and a CW signal generator in a single box. It is ideal for university and education applications, in service and repair, and for discerning hobbyists. The R&S FPC1500 is the first commercially available spectrum analyzer to combine the three instruments most often used in RF engineering in a single economical product.
Fore more information visit www.rohde-schwarz.com)