MTM Power’s 60 W supplies deliver more power in a smaller case

MTM Power expands its program with the third generation of AC/DC modules for reliable supply of electrical and electronic systems. The PMAT/PCMAT60 60W module family is electrically and mechanically compatible to the PMAS/PCMAS48 series while offering 25 % more output power in the same case. With a typical efficiency of up to 89 %, the components of the modules are completely covered in PU resin using thermoselective vacuum encapsulation, to provide a reliable protection against mechanical stresses and environmental conditions. The modules are optionally available for PCB mounting (PMAT) or for chassis mounting (PCMAT) with screw connectors.

The wide input voltage range of 90…264 VAC enables the worldwide use at AC voltage grids. As an option, an active inrush current limiting is available which is particularly advantageous when operating several modules at only one control circuit. On the output side, a stabilized voltage of 24 VDC are provided; other output voltages are available on request. The modules are protected against overload by a deactivating foldback characteristic curve in the so-called hiccup mode and thus continuously overload and short circuit protected. The operating temperature range is acc. to the industrial requirements and lasts from -40…+70 °C.

For more information visitmtm-power.com/en/

Power Supplies & Energy Storage News

No Comments

Join the conversation!

Error! Please fill all fields.