X
X

Components & Devices

APEC 2018 Magnetics Industry Session addresses high-Frequency Issues

The Power Sources Manufacturers Association (PSMA) Magnetics Committee is sponsoring an Industry Session at APEC 2018 covering winding design for high-frequency magnetics. Its goal is to address many of the challenges facing magnetics design in high-frequency switch mode power su...

Components & Devices Test & Measurement News

TDK addresses embedded technologies at Embedded World 2018

TDK will be at Embedded World 2018 from February 27 to March 1 in Nuremberg, Germany, at booth 209 in hall 3A by its group companies TDK-Micronas, TDK-Lambda, TDK Europe, and InvenSense. For the first time, TDK is showing magnetic sensors and embedded motor control solutions as w...

Assemblies & Cables Components & Devices Power Supplies & Energy Storage News

Infineon highlights power electronics portfolio at APEC 2018

Power semiconductor technologies based on advanced GaN, SiC and Si will share the spotlight in the Infineon Technologies exhibit at the Applied Power Electronics Conference (APEC). From March 4-8, 2018, Infineon will showcase energy-efficient, reliable and cost-effective semicond...

Components & Devices Power Supplies & Energy Storage Thermal Management News

Infineon’s latest EconoDUAL 3 IGBT modules with integrated shunts reduce system costs

Infineon Technologies takes its EconoDUAL 3 modules to the next level of integration with integrated shunt resistors for current monitoring in the AC path. Implementing these devices helps inverter manufacturers to reduce cost, improve performance and simplify the inverter design...

Components & Devices News

Panasonic’s ETQ-P3M automotive power inductors tout high heat and vibration resistance

Panasonic Industry Europe is launching new highly-reliable power inductors for automotive and other demanding applications that require a high heat (up to +150°C including self-heating) and vibration resistance (up to 30G). Benefiting from a shielded construction, the low-profi...

Components & Devices News

VENTURI Formula E uses ROHM SiC power devices in its latest racer

ROHM Semiconductor has been official technology partner of the VENTURI Formula E team since Season 3, and this year ROHM brings its innovative SiC (Silicon carbide) power devices to the race track to increase the effectiveness of the power electronics system in the VENTURI Formul...

Components & Devices Motion Control News

Toshiba’s 100V N-channel power MOSFETs empower industrial apps

Toshiba Electronics Europe has started to ship two new 100V additions to its low-voltage U-MOS IX-H N-channel power MOSFET series. The new devices are ideally suited to power supply applications in industrial equipment as well as motor control applications. Fabricated with Toshib...

Components & Devices News

KEMET’s automotive-grade film caps handle challenging environments

KEMET announced a new family of automotive grade metallized polypropylene film capacitors. F863 class X2 miniature capacitors are specifically designed to provide robust performance in safety applications in harsh environments and severe ambient conditions. These new devices a...

Components & Devices News

PSMA’s Safety & Compliance Committee to host APEC industry sessions

The Power Sources Manufacturers Association (PSMA) Safety & Compliance Technical Committee is sponsoring two Industry Sessions as part of APEC 2018. The sessions are: “Comparisons and Trade-offs of Integrated Gate Driver Isolation Technologies” (IS04) and “Isolation Top...

Components & Devices Test & Measurement Thermal Management News

STMicro’s STWLC33 Qi and AirFuel compatible inductive power receiver handles 15W

Mouser Electronics is now stocking the STWLC33 inductive wireless power receiver from STMicroelectronics, an integrated, multi-mode wireless power-receiver solution optimized for portable high-speed chargeable applications up to 15W. The dual-mode receiver operates with both the ...

Components & Devices News

HARTING to emphasize partnerships at Hannover Messe 2018

The HARTING Technology Group will once again be showcasing numerous new products and solutions at the HANNOVER MESSE, from 23rd to the 27th of April 2018. This year, HARTING (Hall 11 / Stand C13) will highlight the importance of Integrated Industry partnerships by way of a few ex...

Components & Devices Power Supplies & Energy Storage News

Vishay Intertechnology’s integrated phototriac has 600 V/μs dv/dt, reduces costs, saves space

Vishay Intertechnology introduced a 1A integrated power phototriac, designed to directly drive medium AC loads. Featuring high dv/dt to 600 V/μs, the Vishay Semiconductors VO2223B delivers high robustness and noise isolation for home appliances and industrial equipment. Consisti...

Components & Devices News

Analog’s triple-output, buck/buck/boost synchronous controller serves automotive start/stop systems

Analog Devices announced the Power by Linear LTC7815, a high frequency (up to 2.25MHz) triple output (buck, buck, boost), synchronous DC/DC controller that maintains all output voltages in regulation during automotive cold crank conditions. A 12V automotive battery can droop to l...

Components & Devices Power Supplies & Energy Storage News

Diode’s constant-current low-profile DFN-packaged LED drivers target edge-lighting apps

In response to growing demand for smaller LED lighting installations that also provide high efficiency and ultra-low EMI, Diodes Incorporated has extended its BCR420U and BCR421U families of linear LED drivers to include the BCR420UFD and BCR421UFD devices in the ultra-low profil...

Components & Devices Power Supplies & Energy Storage News

BRIDG collaboration to create battery-free IoT wireless sensors

BRIDG, an industry-led public-private partnership for advanced technologies and manufacturing processes, announced a collaboration with Face International in the development and integration of a patented energy-harvesting technology – the Evercell power cell – that is capable...

Components & Devices Power Supplies & Energy Storage Thermal Management News

AVX expands its automotive-grade tantalum capacitor selection

AVX, a leading manufacturer and supplier of passive components, interconnects, sensors, and control solutions, has added a new “U” case (EIA Metric 7361-43) to its TRM Professional Series multianode, ultralow-ESR tantalum capacitors, extending the range with several new ratin...

Components & Devices News

Bender’s Smart Grid Charge Controller enables faster and safer EV charging

Bender, expanding its e-mobility business, has released a family of compact, intelligent, and cost- effective charge controllers to address the infrastructure needed to ensure that finding a charging station or charging point is not a problem. A Bender charge controller is the ma...

Components & Devices Power Supplies & Energy Storage News

Mouser first to stock ONSemi’s FDMF8811 110V bridge power stage module

Mouser Electronics, a leading New Product Introductiondistributor with a wide selection of semiconductors and electronic components, is the first distributor to stock the FDMF8811 bridge power stage module from ON Semiconductor. The industry’s first 100 V bridge power stage mod...

Components & Devices News

Analog Devices’ PMBus-controlled bidirectional DAC can adjust the output of virtually any DC/DC regulator

Analog Devices announces the "Power by Linear" LTC7106, a PMBus-(I²C)-controlled precision bidirectional current DAC designed to adjust the output voltage of virtually any DC/DC regulator. Through its PMBus-compatible interface, the LTC7106 receives a 7-bit serial code and conve...

Components & Devices News

Coilcraft’s 0402‐sized ceramic chip inductors provide Q Factors up to 162 at 2.4 GHz

Coilcraft's 0402DC Series ceramic wirewound chip inductors offer the industry's highest Q factors in an 0402 (1005) size - up to 162 at 2.4 GHz - for super low loss in high frequency circuits. It is offered in 26 standard inductance values ranging from 3.0 to 120 nH. An additiona...

Components & Devices News